LED-test-standards-talk-with-Poppe-MENT

By Debra Vogler, senior technical editor

March 23, 2011 — Emerging LED test standards was one of the topics covered at MEPTEC’s The Heat is On event, held in CA this week. András Poppe, PhD, marketing manager in Mentor Graphics’ MicReD division, took on a number of important LED testing challenges in his presentation.

Listen to Vogler’s interview with Poppe:  Download or Play Now 

The importance of defining thermal resistance for LEDs was noted by Poppe: some LED vendors neglect the effect of radiant flux (Popt, i.e., emitted optical power) in their calculations, which results in better data than is actually achieved in the field. Still another example where calculations need to be carefully weighed is determining the amount of cooling needed for reliable LED operation (Fig. 1). In this case, hot lumens need to be taken into account, essentially, calculating the light output under real operating junction temperatures (i.e., the actual operating conditions) rather than laboratory test conditions. In the accompanying podcast interview, Poppe explains these concepts.

Junction temperature — performance indicator Differential formulation of the thermal resistance

Calculation: TJ = RthJ-X x PH + TX 
RthJ-X junction-to-reference_X thermal resistance supplied by the LED vendor
PH heating power measured/calculated by the LED user. How?
TX reference temperature (un)specified by the LED user.

Used in the design process to decide if the foreseen cooling is sufficient or not.
Not enough: in case of LEDs, prediction of "hot lumens" is also required.

 Click to Enlarge
Figure 1. Junction temperature and thermal resistance calculations. SOURCE: Mentor Graphics

Poppe also presented a comprehensive LED testing solution (Fig. 2), noting that the JEDEC JC15 committee is working on this issue along with the CIE (Commission Internationale de l’Eclairage). Additional comments can be heard in his interview, along with a discussion of challenges associated with testing AC mains-driven LEDs — a major trend because they can be substituted for conventional light bulbs.

 

Click to Enlarge

Figure 2. Comprehensive LED testing. SOURCE: Mentor Graphics

Subscribe to Solid State Technology/Advanced Packaging.

Follow Solid State Technology on Twitter.com via editors Pete Singer, twitter.com/PetesTweetsPW and Debra Vogler, twitter.com/dvogler_PV_semi.

Or join our Facebook group

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

NEW PRODUCTS

Spectral reflectometer for film thickness measurement
04/08/2014Verity Instruments, Inc. is pleased to announce the availability of its new SP2100 Spectral Reflectometer designed for film thickness measurement f...
New Kimtech Pure G3 EvT nitrile gloves
04/03/2014Kimberly-Clark Professional has introduced a new glove that is designed to provide process protection for the semiconductor and electronics industries....
UVOTECH releases UV-Ozone Cleaning System
04/03/2014Using a UV-Ozone Cleaner, near atomically clean surfaces can be achieved in minutes without any damage to your devices. ...