3D Integration and Advanced Packaging Innovation March 27th 1:00 p.m. ET Register here: https://event.webcasts.com/starthere.jsp?ei=1032084 2.5/3D integration and advanced packaging enable better chip performance in a smaller form factor, meeting the needs of smartphones, tablets, and other advanced devices. However, 2.5/3D packaging creates a new set of manufacturing challenges, such as the need to fabricate copper pillars, TSVs, wafer bumping and redistribution layers – which may involve thicker photoresists, spin-on dielectrics and BCB coatings — and processing may be done on panels instead of round wafers. In this webcast, experts will detail various options, future scenarios and challenges that must still be overcome. Speakers: Sitaram Arkalgud Sitaram Arkalgud is Vice President, 3D technology at Invensas Corp., where he leads the company’s 3D-IC research and development efforts. Prior to Invensas, he started and led 3D-IC development at SEMATECH, where the focus was on delivering manufacturable process technologies for 3D interconnects. Previously, Sitaram worked in a variety of roles spanning R&D and manufacturing in memory and logic technologies at Infineon/Qimonda and Motorola. He is the author of several publications and holds 14 U.S. patents. Sitaram holds a master’s degree and a Ph.D. in materials engineering from Rensselaer Polytechnic Institute in Troy, N.Y., and a bachelor’s degree in metallurgical engineering from Karnataka Regional Engineering College, Surathkal, India. Richard Rogoff Richard Rogoff is Vice President and General Manager of the Lithography Systems Group at Rudolph Technologies. Prior to joining Rudolph he spent 23 years with ASML in various executive, operational and engineering positions. Most recently he served as Vice President of ASML optics business unit. He received a B.S. in Microelectronic Engineering from Rochester Institute of Technology and a M.B.A. from INSEAD Business School. Sponsored by: Rudolph Technologies, Inc. is a worldwide leader in the design, development, manufacture and support of defect inspection, advanced packaging lithography, process control metrology, and data analysis systems and software used by semiconductor device manufacturers worldwide. Rudolph provides a full-fab solution through its families of proprietary products that provide critical yield-enhancing information, enabling microelectronic device manufacturers to drive down the costs and time to market of their products. the Company’s expanding portfolio of equipment and software solutions is used in both the wafer processing and final manufacturing of ICs, and in adjacent markets such as FPD, LED and Solar. Headquartered in Flanders, New Jersey, Rudolph supports its customers with a worldwide sales and service organization.