Fab spending poised for remarkable fourth year of growth

The latest update to the SEMI World Fab Forecast report, published on February 28, 2018, reveals fab equipment spending will increase at 5 percent in 2019 for a remarkable fourth consecutive year of growth as shown in figure 1. China is expected to be the main driver of fab equipment spending growth in 2018 and 2019 absent a major change in its plans. The industry had not seen three consecutive years of growth since the mid-1990s.

Figure 1

Figure 1

SEMI predicts Samsung will lead in fab equipment spending both in 2018 and 2019, with Samsung investing less each year than in 2017.  By contrast, China will dramatically increase year-over-year fab equipment spending by 57 percent in 2018 and 60 percent in 2019 to support fab projects from both multinationals and domestic companies. The China spending surge is forecast to accelerate it past Korea as the top spending region in 2019.

After record investments in 2017, Korea fab equipment spending will decline 9 percent, to US$18 billion, in 2018 and an additional 14 percent, to US$16 billion, in 2019. However both years will outpace pre-2017 spending levels for the region. Fab equipment spending in Taiwan, the third-largest region for fab investments, will fall 10 percent to about US$10 billion in 2018, but is forecast to rebound 15 percent to over US$11 billion in 2019. (Details about other regions’ spending trends are available in SEMI’s latest World Fab Forecast.)

As expected, China’s fab equipment spending is increasing as projects shift to equipment fabs constructed earlier in this cycle.  The record 26 volume fabs that started construction in China in 2017 will begin equipping this year and next.  See figure 2.

Figure 2

Figure 2

Non-Chinese companies account for the largest share of fab equipment investment in China. However, Chinese-owned companies are expected to ramp up fabs in 2019, increasing their share of spending in China from 33 percent in 2017 to 45 percent in 2019.

Product Sector Spending

3D NAND will lead product sector spending, growing 3 percent each in 2018 and 2019, to US$16 billion and US$17 billion, respectively. DRAM will see robust growth of 26 percent in 2018, to US$14 billion, but is expected to decline 14 percent to US$12 billion in 2019.  Foundries will increase equipment spending by 2 percent to US$17 billion in 2018 and by 26 percent to US$22 billion in 2019, primarily to support 7nm investments and ramp of new capacity.


Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

One thought on “Fab spending poised for remarkable fourth year of growth

  1. Kent Ridgeway

    This made me angry as the headline is fake news• Fab spending poised for remarkable fourth year of growth
    leads one to believe there were 4 consecutive years of growth from 2014 -2018.
    Of course the fake news headline had me open it to find I was correct (fake news headline) which they then explain as 4 consecutive years of growth through 2019. While not as bad as the news channels, we should be held to a higher standard when reporting our industry news.


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>


Leak check semiconductor process chambers quickly and reliably
02/08/2018INFICON,a manufacturer of leak test equipment, introduced the UL3000 Fab leak detector for semiconductor manufacturing maintenance teams t...
Radiant Vision Systems announces new automated visual inspection system
11/06/2017Radiant Vision Systems, a provider of high-resolution imaging solutions for automated visual analysis of devices and surfaces, an...
SEMI-GAS Xturion Blixer enables on-site blending of forming gas mixtures
10/03/2017The Blixer provides a cost-effective alternative to purchasing expensive pre-mixed gas cylinders by enabling operators to blend ...