Magazines

MAGAZINES ARTICLES



KLA-Tencor Evolves Inspection and Review Portfolio for 3D Future

07/10/2014  Systems detect and categorize defects that limit yield in advanced IC manufacturing.

How to Drive and Motivate Modern-Day Innovation

07/10/2014  Technology innovation isn’t slowing down. But its steady acceleration isn’t happening spontaneously, and Tuesday’s Silicon Innovation Forum keynote from Professor of Innovation Dr. Bob Metcalfe outline how he believes to effectively drive the complex cycle that is modern-day innovation.

Vacuum Technologies Needed for 3D Device Processing

07/10/2014  Complex effluent management of ALD and CVD processes using novel precursors

Development of Silicon Photonics Devices Discussed in Forum

07/09/2014  Six speakers discussed developments in designing and manufacturing silicon photonics devices in a TechXPOT North session on Wednesday morning.

The Connected Experience: A Manufacturer’s Dream?

07/09/2014  Imagine being able to not only track and address equipment degradation in real time, but also analyze patterns in your factories’ equipment and address potential issues before they even present a problem. It may sound too good to be true, but Microsoft’s Sanjay Ravi explained in Wednesday morning’s keynote that this innovation is becoming available now to manufacturers.

Trends in Next-Generation MEMS Discussed in TechXPOT Forum

07/09/2014  The microelectromechanical system (MEMS) device market is forecast to increase at a compound annual growth rate of 13 percent over the next five years, reaching $24 billion in 2019, according to Jean-Christophe Eloy, president and CEO of Yole Développement.

The End of Scaling?

07/09/2014  Are we reaching the end of scaling? Yes and no. Let me explain.

New Materials Provide Innovation Yet Add Complexity

07/09/2014  If semiconductor materials had a personal Facebook page, its status would be: It’s Complicated.

Standards Industry Leaders Honored at SEMICON West 2014

07/09/2014  SEMI honored eight industry leaders for their outstanding accomplishments in developing standards for the microelectronics and related industries. The annual SEMI Standards awards were announced at the SEMI Standards reception held during SEMICON West 2014.

The Future Looks Incredible, But Not If We Stay The Same

07/09/2014  Micron President Mark Adams’ keynote on Tuesday morning at SEMICON West 2014 was both optimistic and challenging, perhaps even unsettling for companies unused to evolving with the times.

FinFETs and FDSOI Provide Options

07/08/2014  Everybody loves FinFETs! Well, not everybody, really, is behind double-gate or multiple-gate field-effect transistors.

EUV: Coming but Not Here Yet

07/08/2014  Extreme-ultraviolet lithography is making progress! Well, check that. EUV technology is progressing, yet it remains uncertain when its insertion into volume production of semiconductors will occur.

3DICs Have Finally Arrived

07/08/2014  Intel, Samsung Electronics, and Taiwan Semiconductor Manufacturing have made their moves into three-dimensional semiconductors. Now it remains to be seen how the rest of the semiconductor industry will make the transition to 3DICs.

First 450mm Wafers Patterned with Immersion Lithography Displayed

07/08/2014  A collection of the first fully patterned 450mm wafers are on display at SEMICON West this week at the newly merged SUNY CNSE/SUNYIT exhibit, booth 517, located in the Moscone Center’s South Hall. The wafers will be on display throughout the exhibition and showcased in the 450 mm Technology Development Session on Thursday July 10th.

Sunny prospects await photovoltaics in 2014

07/08/2014  The long night in solar energy may be coming to an end.

What's next for semiconductor packaging?

07/08/2014  With mobile devices continuing to shrink in size and wearable electronics emerging as a new market for semiconductors, advanced packaging technologies are taking on increasing importance in the global supply chain. Aside from the 3DIC package/system-in-package area, what is going on in semiconductor packaging these days?

FinScale’s Quantum FinFET Aims to Revive Moore’s Law

07/07/2014  FinScale Incorporated, the semiconductor device and process innovation company, today announced immediate availability of its qFinFETTM technology, a next generation 3D MOSFET architecture and manufacturable process readily transferable to foundries and integrated device manufacturers

SEMI Announces Results of Board Elections and Leadership Appointments

07/07/2014  SEMI today announced that Martin Anstice, president and CEO, Lam Research Corporation; Kevin Crofton, president and COO, SPTS Technologies; Tien Wu, COO, ASE Group; and Guoming Zhang, executive vice president, Sevenstar Electronics, were elected as new directors to the SEMI International Board of Directors in accordance with the association's by-laws.

SEMI Forecasts Back-to-Back Years of Double-Digit Growth in Chip Equipment Spending

07/07/2014  SEMI projects back-to-back years of double-digit growth in worldwide semiconductor equipment sales according to the mid-year edition of the SEMI Capital Equipment Forecast, released here today at the annual SEMICON West exposition.

Qualcomm: Scaling down is not cost-economic anymore - so we are looking at true monolithic 3D

06/16/2014  Over the course of three major industry conferences (VLSI 2013, IEDM 2013 and DAC 2014), executives of Qualcomm voiced a call for monolithic 3D "to extend the semiconductor roadmap way beyond the 2D scaling" as part of their keynote presentations.




FINANCIALS



TECHNOLOGY PAPERS



How to Use Imaging Colorimeters for FPD Automated Visual Inspection

The use of imaging colorimeter systems and analytical software to assess display brightness and color uniformity, contrast, and to identify defects in FPDs is well established. A fundamental difference between imaging colorimetry and traditional machine vision is imaging colorimetry's accuracy in matching human visual perception for light and color uniformity. This white paper describes how imaging colorimetry can be used in a fully-automated testing system to identify and quantify defects in high-speed, high-volume production environments.February 27, 2015
Sponsored by Radiant Vision Systems

Epoxies and Glass Transition Temperature

Gain a better understanding about glass transition temperature (Tg) and why it is one of many factors to consider for bonding, sealing, coating and encapsulation applications. In this paper, we explore how temperature impacts the performance of polymers, why glass transition temperature is significant, and how it is measured. Tg can be an extremely useful yardstick for determining the reliability of epoxies as it pertains to temperature.January 09, 2015
Sponsored by Master Bond, Inc.,

Enhancing the Reliability of Flip Chip Assemblies with Underfill Encapsulants

The development of epoxy based underfill encapsulants marked a turning point for flip chip technology, and the semiconductor industry. Underfill encapsulants are carefully formulated to ensure flowability, an acceptable CTE, and other desirable properties. In this white paper, we explore what properties are required for effective underfills to ensure reliability and quality in flip chip applications.October 07, 2014
Sponsored by Master Bond, Inc.,

More Technology Papers

WEBCASTS



3D Integration

March 2015 (Date and time TBD)

Die stacking enables better chip performance in a small form factor, meeting the needs of smartphones, tablets, and other advanced devices. Through-silicon vias are moving into volume packaging production, but problems with reliability, cost, and scaling remain. The supply chain also must adjust to this “mid” step between front- and back-end chip production. This webcast will explore the wafer thinning, bonding, TSV formation and other critical process steps necessary to enable 3D integration.

Sponsored By:

Materials

April 2015 (Date and time TBD)

Success in electronics manufacturing increasingly relies on the materials used in production and packaging. In this webcast, experts will focus on changing material requirements, the evolving material supply chain, recent advances in process and packaging materials and substrates, and the role new materials will play in the future.

Sponsored By:
MEMS

May 2015 (Date and time TBD)

MEMS have quite different process and material requirements compared to mainstream microprocessor and memory types of devices. This webcast will explore the latest trends in MEMS devices – including sensor fusion, biosensors, energy harvesting – new manufacturing challenges and potential equipment and materials solutions to those challenges.

Sponsored By:
More Webcasts

VIDEOS



EVENTS



SEMICON China 2015
Shanghai
http://www.semiconchina.org
March 17, 2015 - March 19, 2015
LED Taiwan 2015
Taipei, Taiwan
http://www.ledtaiwan.org/en/
March 25, 2015 - March 28, 2015
SEMICON Southeast Asia 2015
Penang, Malaysia
http://www.semiconsea.org
April 22, 2015 - April 24, 2015
ASMC 2015
Saratoga Springs, NY
http://www.semi.org/en/asmc2015
May 03, 2015 - May 06, 2015
The ConFab
Las Vegas, Nevada
http://www.theconfab.com
May 19, 2015 - May 22, 2015