MEMS

MAGAZINE



MEMS ARTICLES



Universities obtain new funding from nano-bio manufacturing consortium

07/28/2017  Three leading U.S. universities are the latest recipients of funding from the Nano-Bio Manufacturing Consortium (NBMC), operated by SEMI.

The pervasiveness of ASICs in the IoT era

07/28/2017  For an increasing number of designs, companies are finding it beneficial to design their own ASICs with system-on-a- chip (SoC) complexity. For reasons of cost reduction, quality improvement, IP protection and security, a full turn-key ASIC can be achieved for $1-5 million, particularly if the design can be built using mature technology nodes.

What’s next in leading edge semiconductor manufacturing?

07/27/2017  Solid State Technology will be conducting a new survey will take aim at understanding what this evolution means to the semicon-ductor manufacturing industry supply chain in terms of the technology that will be needed.

Dow Corning receives Global Supplier Award from Bosch

07/26/2017  Issued every two years, Bosch’s coveted awards recognize companies that have demonstrated outstanding performance in the manufacture and supply of products or services to Bosch.

North American semiconductor equipment industry posts June 2017 billings

07/26/2017  Through the first half of the year, 2017 equipment billings are 50 percent above the same period last year.

Ultrathin device harvests electricity from human motion

07/24/2017  A new electrochemical energy harvesting device developed at Vanderbilt University can generate electrical current from the full range of human motions and is thin enough to embed in clothing.

NUS engineers achieve significant breakthrough in spin wave-based information processing technology

07/24/2017  Novel method of propagating spin waves could pave the way for high-speed, miniaturized data processing devices.

Gartner reports worldwide PC shipments declined 4.3% in second quarter of 2017

07/21/2017  Worldwide PC shipments totaled 61.1 million units in the second quarter of 2017, a 4.3 percent decline from the second quarter of 2016, according to preliminary results by Gartner, Inc.

MagnaChip and ELAN Microelectronics announce partnership

07/17/2017  MagnaChip Semiconductor Corporation announced today it was selected as a foundry partner by ELAN Microelectronics to manufacture the world's first fingerprint sensor IC-based smartcard.

Breathable, wearable electronics on skin for long-term health monitoring

07/17/2017  A hypoallergenic electronic sensor can be worn on the skin continuously for a week without discomfort, and is so light and thin that users forget they even have it on, says a Japanese group of scientists.

Hamburg researchers develop new transistor concept

07/17/2017  Transistors, as used in billions on every computer chip, are nowadays based on semiconductor-type materials, usually silicon. As the demands for computer chips in laptops, tablets and smartphones continue to rise, new possibilities are being sought out to fabricate them inexpensively, energy-saving and flexibly.

Researchers develop a novel type of optical fiber that preserves the properties of light

07/17/2017  Scientists from the Moscow Institute of Physics and Technology (MIPT) and the Kotelnikov Institute of Radio Engineering and Electronics (IRE) of the Russian Academy of Sciences (RAS), in collaboration with their colleagues from Finland, have developed a new type of optical fiber that has an extremely large core diameter and preserves the coherent properties of light.

Digital revolution: The path to innovation is opened by disruption

07/13/2017  Digital disruption begets innovation. Challenges equal opportunities.

MORE MEMS ARTICLES

TWITTER


WEBCASTS



Dense Off Chip Integration (DOCI): Advanced Packaging, low cost alternatives to boost electronic system performance

Wednesday, August 9, 2017 at 1 p.m. ET

The slowing down of Moore's Law even at leading CMOS Fabs due to approaching Physics limits, while at the same time the explosion in demand for chips and systems across a wide range of market segments (compact wearable / portable consumer systems, the transfer and processing of data to and from the cloud, at the high performance end specialized architectures e,g for AI) has revived interest in Dense Off Chip Integration (DOCI ), first used in MCMs (Multi Chip Modules) for mainframes some 3 decades ago.

Sponsored By:
Materials

Date and time TBD

Success in electronics manufacturing increasingly relies on the materials used in production and packaging. More than 50 different elements from the periodic table are now used in semiconductor manufacturing, and the list grows even longer when you consider the requirements of flexible/printed electronics, LEDs, compound semiconductors, power electronics, displays, MEMS and bioelectronics. In this webcast, experts will focus on changing material requirements, the evolving material supply chain, recent advances in process and packaging materials and substrates, and the role new materials such as carbon nanotubes will play in the future.

Sponsored By:

MEMS

Date and time TBD

MEMS have quite different process and material requirements compared to mainstream microprocessor and memory types of devices. We will explore the latest trends in MEMS devices – including sensor fusion, biosensors, energy harvesting – new manufacturing challenges and potential equipment and materials solutions to those challenges.

Sponsored By:

More Webcasts

TECHNOLOGY PAPERS



Learn the Basics of Power Amplifier and Front End Module Measurements

The power amplifier (PA) – as either a discrete component or part of an integrated front end module (FEM) – is one of the most integral RF integrated circuits (RFICs) in the modern radio. Download this white paper to learn the basics of testing RF PAs and FEMs via an interactive white paper with multiple how-to videos.May 22, 2017
Sponsored by National Instruments

Wafer Handler Predictive Monitor and Equipment Verification, Excursion Detection, Defect Reduction & Tool Matching

Consistent equipment performance, avoiding unscheduled downtime, reducing defects and preventing excursions is key to reducing cost and improving die and line yield in semiconductor manufacturing. The fully automated InnerSense SmartWafer (SMW2) system addresses these key metrics. The SMW2 system is effectively being used as a predictive monitor for handler PM’s, a leading indicator for mechanical defects and can detect, predict and prevent most mechanical related excursions, including wafer damage that can lead to subsequent wafer breakage. The SMW2 system can further improve tool availability by improving post PM recovery and tool matching.January 24, 2017
Sponsored by InnerSense

What You Should Know About 802.11ax

The upcoming IEEE 802.11ax High-Efficiency Wireless (HEW) standard promises to deliver four times greater data throughput per user. It relies on multiuser technologies to make better use of the available Wi-Fi channels and serve more devices in dense user environments. Explore this technology introduction white paper to learn about the new applications of 802.11ax, the key technical innovations to the standard, and its test and measurement challenges. January 10, 2017
Sponsored by National Instruments

More Technology Papers

EVENTS



Advanced Process Control Conference
Austin, Texas
http://www.apcconference.com
October 09, 2017 - October 12, 2017
IEDM 2017
San Francisco, CA
http://ieee-iedm.org
December 02, 2017 - December 06, 2017
SEMI-THERM
San Jose, CA
http://semi-therm.org
March 19, 2018 - March 23, 2018

VIDEOS