MEMS

MAGAZINE



MEMS ARTICLES



Taiwan tops fab spending - Driving anticipation for SEMICON Taiwan 2015

06/29/2015  In 2015,Taiwan is projected to have the highest capex for semiconductor manufacturing worldwide.

Opening a new route to photonics

06/29/2015  A new route to ultrahigh density, ultracompact integrated photonic circuitry has been discovered by researchers with the Lawrence Berkeley National Laboratory (Berkeley Lab) and the University of California (UC) Berkeley.

Photolithography equipment & materials market is attracting new players, but success is not guaranteed

06/29/2015  Growing photolithography equipment markets in advanced packaging, MEMS and LEDs are attracting new players; but they have to navigate complex roadmaps.

“What’s next?” ─ Advances in technology at SEMICON West 2015

06/25/2015  The latest manufacturing, materials and production developments in semiconductor and related technologies will be featured at SEMICON West 2015 on July 14-16 at Moscone Center in San Francisco, Calif.

Toward tiny, solar-powered sensors

06/24/2015  Last week, at the Symposia on VLSI Technology and Circuits, MIT researchers presented a new power converter chip that can harvest more than 80 percent of the energy trickling into it, even at the extremely low power levels characteristic of tiny solar cells.

imec and Holst Centre present a gas sensing platform for intuitive IoT applications

06/23/2015  Imec and Holst Centre have developed a small NO2 sensor featuring a low power consumption in the mW range.

MEMS applications take the stage in the first edition of the European MEMS Summit

06/22/2015  The first edition of this Summit will take place on September 17-18, 2015 in Milan, Italy and its theme will be “Sensing the Planet, MEMS for Life.”

MORE MEMS ARTICLES

TWITTER


FINANCIALS



TECHNOLOGY PAPERS



Three Key Factors to Create Leak-Free Fitting Assemblies for Fluid Processing Applications

Operational efficiency is a critical factor in the fluid processing industry. The synergy of fitting components and assembly technology to achieve this objective is the focus of Fit-LINE, Inc. Applying extensive polymer technology and injection molding expertise, the company has analyzed the design, tooling and manufacturing processes required to create high-performance solutions for demanding high-purity fluid processing applications. Through extensive R&D, testing and evaluation, Fit-LINE has isolated three variables that need to be addressed to ensure leak-free fitting assemblies.June 01, 2015
Sponsored by Fit-LINE, Inc.

Silicones Meet the Needs of the Electronics Industry

Remarkable silicones. The combination of their unique ability to maintain physical properties across a wide range of temperature, humidity, and frequency--combined with their flexibility--set them apart. Silicone based adhesives, sealants, potting and encapsulation compounds are used in hundreds of consumer, business, medical, and military electronic systems. In this white paper, learn what makes silicones different from other organic polymers, why their properties remain stable across different temperatures, and how they have played a major role in the rapid innovation of the electronics industry.May 12, 2015
Sponsored by Master Bond, Inc.,

ASIC Design Made Cost Effective with Low Cost Tools and Masks

For smaller projects or companies with modest design budgets, ASIC design is becoming a viable option due to low cost design tools and easy access to flexible, mature IC processes. This is especially compelling for developing mixed-signal ASICs for cost-sensitive sensor applications for the Internet of things (IoT). This paper discusses how costs and risks can be reduced using multi-project wafer services, coupled with affordable design tools for developing mixed-signal ASICs. April 13, 2015
Sponsored by Mentor Graphics

More Technology Papers

WEBCASTS



Isolating Electrical Faults in Advanced IC Devices

July 29, 2015 at 2:00 p.m. ET

Yield improvement and production engineers working on today's ICs encounter many challenges as defects affecting device operation go undetected by traditional in-line techniques. Electrical Failure Analysis (EFA) is a suite of techniques that helps the modern day fab increase yields by isolating faults to areas small enough for Physical Failure Analysis (PFA). In this Webinar, we showcase a few of the proven EFA fault isolation techniques and describe how EFA helps to characterize the underlying defects.

Sponsored By:
Interconnects

July 2015 (Date and time TBD)

This webcast will examine the state-of-the-art in conductors and dielectrics, -- including contacts and Metal1 through global level -- pre-metal dielectrics, associated planarization, necessary etch, strip and cleans, embedded passives, global and intermediate TSVs for 3D, as well as reliability, system, and performance issues.

Sponsored By:
Lock-in Thermography for Advanced Assembly Qualification

August 26, 2015 at 1:00 p.m. ET

Increasing IoT business opportunities drive a need for new packaging techniques such as FOWLP, Embedded Component Packaging, etc. Such new assembly techniques allow more components and functionality to be integrated into an ever decreasing package space. In parallel the faster product cycle drives the need for faster production ramp to stay competitive. All these challenges highlight the need for a better methodology to determine root cause of assembly-related defects during the new package process qualification process. We will demonstrate a totally non-destructive fault localization method based on a lock-in thermography with examples in these areas.

Sponsored By:
More Webcasts

VIDEOS



EVENTS



SEMICON West 2015
San Francisco, CA
http://www.semiconwest.org
July 14, 2015 - July 16, 2015
SPIE Optics and Photonics
San Diego, CA
http://spie.org/x30491.xml
August 09, 2015 - August 13, 2015
European MEMS Summit
Milan, Italy
http://www.semi.org/eu/node/8871
September 17, 2015 - September 18, 2015
SPIE Photomask Technology 2015
Monterey, CA
http://spie.org/x6323.xml
September 29, 2015 - October 01, 2015
SEMICON Europa 2015
Dresden, Germany
http://www.semiconeuropa.org
October 06, 2015 - October 08, 2015
International Electron Device Meeting 2015
Washington D.C. United States
http://www.his.com/~iedm/
December 07, 2015 - December 09, 2015