MEMS

MAGAZINE



MEMS ARTICLES



Vesper launches with very high SNR MEMS microphone

09/22/2014  Intending to improve the smallest audio component found in smartphones, wearables and Internet of Things (IoT) devices, a new Boston-based sensor company called Vesper has designed a microphone that will enhance consumers' acoustic experience with voice capture and sound recording.

Northeastern University researchers develop novel method for working with nanotubes

09/19/2014  Northeastern University researchers have developed a novel method for controllably constructing precise inter-nanotube junctions and a variety of nanocarbon structures in carbon nanotube arrays.

North American semiconductor equipment industry posts August 2014 book-to-bill ratio of 1.04

09/18/2014  A book-to-bill of 1.04 means that $104 worth of orders were received for every $100 of product billed for the month.

ProPlus Design Solutions expands sales operations to Europe

09/18/2014  ProPlus Design Solutions, Inc. announced today it expanded its sales operations to Europe.

Mentor Graphics appoints Vice President for Embedded Technologies

09/18/2014  Mentor Graphics Corp. today announced the appointment of Glenn Perry to the role of vice president of the company's Embedded Systems Division.

Rudolph introduces new acoustic metrology and defect inspection technology

09/18/2014  Rudolph Technologies has introduced its new SONUS Technology for measuring thick films and film stacks used in copper pillar bumps and for detecting defects, such as voids, in through silicon vias (TSVs).

Oxford Instruments launches 3rd annual Indian nanotechnology seminars in Kolkata and Delhi

09/18/2014  Oxford Instruments is hosting its third series of annual seminars for the nanotechnology industry in India in November.

MORE MEMS ARTICLES

FINANCIALS



TECHNOLOGY PAPERS



Conformal Coatings for Reliable Electronic Assemblies

Modern electronics have become part of our daily lives and the sophisticated electronic circuitry at the heart of these devices and systems must be reliable. Conformal coatings act as a barrier between the electronics and the environment, protecting the areas they cover while strengthening delicate components and traces. Find out more about how conformal coatings enhance the reliability and longevity of electronic printed circuit boards.April 24, 2014
Sponsored by Master Bond, Inc.,

The Next Step in Diagnosis Resolution Improvement

Root Cause Deconvolution (RCD), a statistical enhancement technology recently made available in Mentor Graphics’ Tessent Diagnosis and YieldInsight products, is the next step in diagnosis resolution enhancement. It works by analyzing multiple layout-aware diagnosis reports together to identify the underlying defect distribution (root cause distribution) that is most likely to explain this set of diagnosis results. The results are then back- annotated to the individual diagnosis suspects.April 24, 2014
Sponsored by Mentor Graphics

UV LED Curing for the Electronics Industry

This paper provides an introduction to UV LED curing and the many benefits UV LED curing provides for bonding and coating applications in the electronics industry. Product manufacturers, machine builders, and chemistry formulators will gain an understanding of the benefits and how to apply UV LED curing in manufacturing processes. Included are specific examples of how manufacturers are using UV LED to make touch screens, mobile phones, micro speakers, and hard disk drives.April 03, 2014
Sponsored by Phoseon Technology

More Technology Papers

WEBCASTS



Metrology

September 2014 (date and time TBD)

Continued scaling and more complex device structures, including FinFETs and 3D stacking, are creating new challenges in metrology and inspection. Smaller defects must be detected and analyzed on an increasingly diverse set of materials. Chip makers are looking for better wafer edge inspection techniques, higher resolution metrology tools, 450mm-capability and new compositional analysis solutions.

Sponsored By:
Advanced Packaging

Sept. 2014 (Date and time TBD)

Back-end packaging is increasingly important to semiconductor device form factor, thermal and power performance, and costs. Compounded by the demand for lead-free processing and the soaring cost of gold, the industry is developing new approaches to packaging, including redistribution layers (RDL), through silicon vias (TSV), copper pillars, wafer-level packaging (WLP) and copper wire bonding. Experts will discuss these and other approaches in this webcast.

Sponsored By:

Interconnects

Oct. 2014 (Date and time TBD)

This webcast will examine the state-of-the-art in conductors and dielectrics, -- including contacts and Metal1 through global level -- pre-metal dielectrics, associated planarization, necessary etch, strip and cleans, embedded passives, global and intermediate TSVs for 3D, as well as reliability, system, and performance issues.

Sponsored By:

More Webcasts

VIDEOS



EVENTS



APC (Advanced Process Control) Conference XXVI 2014
Ann Arbor, Michigan
http://www.apcconference.com/
September 29, 2014 - October 01, 2014
Strategic Materials Conference
Santa Clara, CA
http://www.semi.org/node/41386
September 30, 2014 - October 01, 2014
SEMICON Europa
Grenoble, France
http://www.semiconeuropa.org
October 07, 2014 - October 09, 2014
MEMS Executive Congress US 2014
Scottsdale, AZ
http://us2014.memscongress.com
November 05, 2014 - November 07, 2014