MEMS

MAGAZINE



MEMS ARTICLES



IRT Nanoelec and CMP team up to offer world’s first service for post-process 3D technologies on multi-project-wafer

03/05/2015  IRT Nanoelec, an R&D consortium focused on ICT using micro- and nanoelectronics, and CMP, which provides prototyping and low-volume production of ICs and MEMS, are launching a platform for multi-project-wafer, post-process 3D integration (3D-MPW).

TowerJazz begins mass production of advanced IR sensor

03/03/2015  TowerJazz, a specialty foundry, announced today it has begun mass production of an IR sensor used by Intel in one of its new 3D sensing solutions.

Mentor Graphics acquires Tanner EDA

03/03/2015  Mentor Graphics Corp. today announced it has acquired the business assets of Tanner EDA, a tool provider for the design, layout and verification of analog/mixed-signal (AMS) and MEMS integrated circuits.

Global semiconductor industry posts highest-ever January sales

03/03/2015  Global sales from January 2015 were 2 percent lower than the December 2014 total of $29.1 billion, reflecting normal seasonal trends.

Cypress debuts reliable, secure fingerprint sensing solution for mobile devices

03/02/2015  The flexible solution enables designers to create custom home buttons with specialized shapes and sizes or to integrate the sensor into any mobile device’s industrial design or home button.

SEMICON Russia 2015 presents Microelectronics Market Conference and new TechARENA sessions

03/02/2015  SEMICON Russia, a meeting place of the entire micro- and nanoelectronics industry in Russia, will take place from 16 to 18 June in Moscow.

Semiconductor unit shipments to exceed one trillion devices in 2017

02/26/2015  Updated forecast expects robust 8.2% average annual unit shipment growth through 2019.

MORE MEMS ARTICLES

FINANCIALS



TECHNOLOGY PAPERS



How to Use Imaging Colorimeters for FPD Automated Visual Inspection

The use of imaging colorimeter systems and analytical software to assess display brightness and color uniformity, contrast, and to identify defects in FPDs is well established. A fundamental difference between imaging colorimetry and traditional machine vision is imaging colorimetry's accuracy in matching human visual perception for light and color uniformity. This white paper describes how imaging colorimetry can be used in a fully-automated testing system to identify and quantify defects in high-speed, high-volume production environments.February 27, 2015
Sponsored by Radiant Vision Systems

Epoxies and Glass Transition Temperature

Gain a better understanding about glass transition temperature (Tg) and why it is one of many factors to consider for bonding, sealing, coating and encapsulation applications. In this paper, we explore how temperature impacts the performance of polymers, why glass transition temperature is significant, and how it is measured. Tg can be an extremely useful yardstick for determining the reliability of epoxies as it pertains to temperature.January 09, 2015
Sponsored by Master Bond, Inc.,

Enhancing the Reliability of Flip Chip Assemblies with Underfill Encapsulants

The development of epoxy based underfill encapsulants marked a turning point for flip chip technology, and the semiconductor industry. Underfill encapsulants are carefully formulated to ensure flowability, an acceptable CTE, and other desirable properties. In this white paper, we explore what properties are required for effective underfills to ensure reliability and quality in flip chip applications.October 07, 2014
Sponsored by Master Bond, Inc.,

More Technology Papers

WEBCASTS



3D Integration

March 2015 (Date and time TBD)

Die stacking enables better chip performance in a small form factor, meeting the needs of smartphones, tablets, and other advanced devices. Through-silicon vias are moving into volume packaging production, but problems with reliability, cost, and scaling remain. The supply chain also must adjust to this “mid” step between front- and back-end chip production. This webcast will explore the wafer thinning, bonding, TSV formation and other critical process steps necessary to enable 3D integration.

Sponsored By:

Materials

April 2015 (Date and time TBD)

Success in electronics manufacturing increasingly relies on the materials used in production and packaging. In this webcast, experts will focus on changing material requirements, the evolving material supply chain, recent advances in process and packaging materials and substrates, and the role new materials will play in the future.

Sponsored By:
MEMS

May 2015 (Date and time TBD)

MEMS have quite different process and material requirements compared to mainstream microprocessor and memory types of devices. This webcast will explore the latest trends in MEMS devices – including sensor fusion, biosensors, energy harvesting – new manufacturing challenges and potential equipment and materials solutions to those challenges.

Sponsored By:
More Webcasts

VIDEOS



EVENTS



SEMICON China 2015
Shanghai
http://www.semiconchina.org
March 17, 2015 - March 19, 2015
LED Taiwan 2015
Taipei, Taiwan
http://www.ledtaiwan.org/en/
March 25, 2015 - March 28, 2015
SEMICON Southeast Asia 2015
Penang, Malaysia
http://www.semiconsea.org
April 22, 2015 - April 24, 2015
ASMC 2015
Saratoga Springs, NY
http://www.semi.org/en/asmc2015
May 03, 2015 - May 06, 2015
The ConFab
Las Vegas, Nevada
http://www.theconfab.com
May 19, 2015 - May 22, 2015
65th Annual ECTC
San Diego, CA
http://www.ectc.net
May 26, 2015 - May 29, 2015