Researchers find new phase of carbon, make diamond at room temperature

12/01/2015  Researchers from North Carolina State University have discovered a new phase of solid carbon, called Q-carbon, which is distinct from the known phases of graphite and diamond.

Silicon Labs acquires Telegesis, a provider of ZigBee modules

11/24/2015  A privately held company founded in 1998 and based near London, Telegesis has established itself as a ZigBee expert with strong momentum in the smart energy market, providing ZigBee module solutions to many of the world’s top smart metering manufacturers.

Trillium announces acquisition of Oxford Instruments - Austin Division

11/24/2015  Trillium US Inc, headquartered in Clackamas, OR, has announced the acquisition of the Oxford Instruments - Austin division.

The inertial MEMS device market keeps on growing. What's next?

11/23/2015  Gyroscope and accelerometer production volumes are also growing, with the following CAGR: 7.9% and 1.6% respectively over the same period. Every sector will keep growing. So, what’s next?

Highlights from Day 2 of IDTechEx Printed Electronics USA 2015

11/23/2015  IDTechEx Printed Electronics USA 2015, held in Santa Clara, CA Nov 18-19, is one mega conference with 8 co-located tracks ranging from sensor technology & wearables to IoT, energy harvesting & storage to electric vehicles, 3D printing and graphene.

Highlights from Day 1 of IDTechEx Printed Electronics USA 2015

11/19/2015  IDTechEx Printed Electronics USA 2015, held in Santa Clara, CA Nov 18-19, is one mega conference with eight co-located tracks ranging from sensor technology & wearables to IoT, energy harvesting & storage to electric vehicles, 3D printing and graphene.

SEMI Industry Strategy Symposium: Integrating market, technology and ecosystem growth

11/19/2015  Today, SEMI announced details about the SEMI Industry Strategy Symposium (ISS) on January 10-13 where semiconductor executives will discuss “Integrating for Growth: Markets, Technology, and Ecosystem” in Half Moon Bay, Calif.

Europe’s secondary industry in the spotlight

11/17/2015  The dramatic shift from the trend for increasingly advanced technology to a vast array and volume of application-based devices presents Europe with a huge opportunity.

What lies beneath? 50 years of enabling Moore’s Law

11/17/2015  Vacuum technology trends can be seen over the period of innovation defined by Moore’s Law, particularly in the areas of increasing shaft speed, management of pumping power, and the use computer modeling.

Wafer bonding for high performance MEMS, power devices, and RF components

11/17/2015  Recent trends and future directions for wafer bonding are reviewed, with a focus on MEMS.





Parylene & Sensors

Learn about how parylene, as an enabling technology, can significantly increase the performance of sensors as they become increasingly integrated into our daily lives. You will learn: 1) Parylene specifications and properties 2) How parylene can improve the performance of sensors 3) Different uses for parylene on different sensor applicationsNovember 17, 2015
Sponsored by Diamond-MT

Potting Compounds Protect Electronic Circuits

Potting and encapsulation compounds are designed to completely enclose a component, module or PCB. This effectively shields the unit from its surroundings while providing structural support and imparting the highest protection from external conditions. There are a variety of potting formulations on the market today that suit the needs of diverse applications. However, a balance must be developed when deciding on the best material. October 15, 2015
Sponsored by Master Bond, Inc.,

Success in the Electronic and High Tech Industry

View this paper to learn how Epicor ERP specifically aligns to the business needs of the electronics and high-tech industry, and hear how one electronics organization achieved improved operational controls, better inventory accuracy, and world class tools to meet supply chain requirements with Epicor ERP.July 01, 2015
Sponsored by Epicor

More Technology Papers


3D NAND Challenges and Opportunities

December 16, 2015 at 12:00 p.m. ET

Flash memory has revolutionized the world of solid-state data storage, mainly because of the advent of NAND technology. However, from the technical point of view, this requires a major change in how these memories are being fabricated. This presentation will discuss this (r)evolution as well as its major scaling limitations.

Sponsored By:
IoT Device Trends and Challenges

January 2016 (Date and time TBD)

The age of the Internet of Things is upon us, with the expectation that tens of billions of devices will be connected to the internet by 2020. This explosion of devices will make our lives simpler, yet create an array of new challenges and opportunities in the semiconductor industry. At the sensor level, very small, inexpensive, low power devices will be gathering data and communicating with one another and the “cloud.” On the other hand, this will mean huge amounts of small, often unstructured data (such as video) will rippling through the network and the infrastructure. The need to convert that data into “information” will require a massive investment in data centers and leading edge semiconductor technology.

Sponsored By:
Trends in MEMS

February 2016 (Date and time TBD)

MEMS have quite different process and material requirements compared to mainstream microprocessor and memory types of devices. This webcast will explore the latest trends in MEMS devices – including sensor fusion, biosensors, energy harvesting – new manufacturing challenges and potential equipment and materials solutions to those challenges.

Sponsored By:

More Webcasts



International Electron Device Meeting 2015
Washington D.C. United States
December 07, 2015 - December 09, 2015
2015 IEEE World Forum on Internet of Things
Milan, Italy
December 14, 2015 - December 16, 2015
SEMICON Japan 2015
Tokyo, Japan
December 16, 2015 - December 18, 2015