Wet Processing, including wafer cleaning, is one of the most common yet most critical processing steps in semiconductor manufacturing, since it can have a huge impact on the success of the subsequent process step. Not only does it involve the removal of organic and metal contaminants, but it must leave the surface in a desired state (hydrophilic or hydrophobic, for example), with minimal roughness and minimal surface loss – all on a growing list of different types of materials. In this webcast, experts will identify industry challenges and possible solutions, including a new concept of tailoring chemistries to dissolve very small particles rather than physically removing them.

More than 100 steps in a standard IC manufacturing process flow involve wafer cleaning or surface preparation, which include post-resist strip/ash residue removal, native oxide removal, and even selective etching. Although dry processes continue to evolve and offer unique advantages for some applications, most cleaning/surface prep processes are “wet,” involving the use of a mixture of chemicals such as hydrofluoric; hydrochloric (HCl), sulfuric or phosphoric acid; or hydrogen peroxide, along with copious amounts of deionized water for dilution and rinsing. Wafers are typically processed in a batch immersion or batch spray system or, increasingly, with a single-wafer approach. The trend is toward more dilute chemistries, aided by the use of some form of mechanical energy, such as megasonics or jet-spray processing.

An important distinction in wafer cleaning today is that the main goal is not particle removal, but some other function, such as removing native oxide or photoresist residue removal after strip/ash.

Additional Reading

Wet process technologies for scalable through silicon vias

Simple wet cleaning improvements can meet new silicon surface preparation criteria

SUPPLIERS


Akrion Systems LLC: http://www.akrionsystems.com/



Al Shultz Technology Advertising: http://www.alshultz.com/



ARTICLES



ClassOne initiative aims to reduce CoO in ≤200mm copper plating

02/22/2017  ClassOne Technology announced a new company-wide initiative to reduce costs of operation (CoO) in copper plating processes.

Murphy, Choh and Pilla join ClassOne Technology's Board of Advisors

12/01/2016  ClassOne Technology, manufacturer of advanced wet processing equipment for ≤200mm substrates, announced the formation of a Board of Advisors.

Samco boosts shipment capacity with second production center

06/21/2016  Samco, a Japan-based semiconductor processing equipment manufacturer, held a completion ceremony for its second production center on June 17.

ClassOne announces major savings with Solstice gold plating

06/02/2016  ClassOne Technology, manufacturer of budget-friendly wet processing equipment, is reporting significant savings in the plating of gold in ≤200mm applications using its Solstice systems.

First quarter 2016 silicon wafer shipments increase quarter-over-quarter

05/17/2016  Worldwide silicon wafer area shipments increased during the first quarter 2016 when compared to fourth quarter 2015 area shipments according to the SEMI Silicon Manufacturers Group (SMG) in its quarterly analysis of the silicon wafer industry.

Wet Processing and Wafer Cleaning

12/11/2015  Wet Processing, including wafer cleaning, is one of the most common yet most critical processing steps in semiconductor manufacturing, since it can have a huge impact on the success of the subsequent process step.

Digital Specialty Chemicals receives investment from Intel Capital

05/26/2015  Digital Specialty Chemicals Limited (DSC), a dual bottom line corporation and leading provider of advanced materials to the semiconductor, pharmaceutical, and specialty chemical markets, announced that it has received an equity investment from Intel Capital, Intel Corporation’s global investment organization.

MEI Wet Processing Systems reveals performance data for new critical etch system

09/02/2014  MEI Wet Processing Systems and Services revealed performance data today on its newly released Cu & TiW Critical Etch System for compound semiconductor manufacturing.

Semiconductor wet chemicals fall short of 2008 levels

06/14/2014  Techcet forecasts $1B electronic chemicals business by 2015.

Avantor, SACHEM selective etch chemisty doubles as wafer cleaner

07/06/2011 

Avantor Performance Materials will launch the first in its new J.T.Baker SLCT Series of selective etch surface treatment chemistries, SLCT 128 sigma etchant, at SEMICON West. The product results from a partnership with etch specialist SACHEM.