DuPont printed electronics material does more with less

November 22, 2011 — DuPont Microcircuit Materials (MCM), a business unit of DuPont Electronics & Communications, introduced a screen-printable silver conductor material for the printed electronics market, DuPont 5064H. The silver conductor ink provides resistivity ≤6milliΩ per square per mil. 

DuPont 5064H can be printed onto substrates including Polyethylene Terephthalate (PET), Polyethylene-Naphthalate (PEN), DuPont Kapton polyimide films, paper, and more.  The composition is solvent-based and was designed to be screen printed in semi-automatic or high-volume reel-to-reel (R2R) applications.

The new product aims to allow printed electronics manufacturing with less material but high performance, said Scott Gordon, market segment manager — DuPont Microcircuit Materials.  “DuPont 5064H can reduce silver cost by providing higher conductivity with thinner prints of conductor traces.” Gordon adds that high-current application that previously required double print steps can go down to one print step with the 5064H material.

See the new material at the Printed Electronics USA trade show, November 30-December 1, 2011, in Santa Clara, CA.

DuPont MCM is a high-volume supplier of electronic inks and pastes, offering many printed electronic materials for electronic applications in the automotive, display, photovoltaic, biomedical, industrial, military and telecommunications markets.  For more information on DuPont Microcircuit Materials, visit http://mcm.dupont.com.

DuPont (NYSE: DD) is a science and engineering company with products, materials, and services. For additional information, please visit http://www.dupont.com.

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

NEW PRODUCTS

KLA-Tencor announces new defect inspection systems
07/12/2018KLA-Tencor Corporation announced two new defect inspection products at SEMICON West this week, addressing two key challenges in tool and process monit...
3D-Micromac unveils laser-based high-volume sample preparation solution for semiconductor failure analysis
07/09/2018microPREP 2.0 provides order of magnitude time and cost savings compared to traditional sample...
Leak check semiconductor process chambers quickly and reliably
02/08/2018INFICON,a manufacturer of leak test equipment, introduced the UL3000 Fab leak detector for semiconductor manufacturing maintenance teams t...