Newport introduces 450mm air bearing stages

Newport Corporation introduced a line of high-performance air bearing stages specifically designed for the 450mm semiconductor wafer initiative. The new DynamYX® DatumTM 450 and 450GT are based on Newport’s proven DynamYX 300-series wafer processing and inspection platforms with more than 1,000 worldwide installations.  They are designed to handle the larger travel ranges, payloads, and increased throughput requirements of next-generation 450mm tools.

The DynamYX Datum 450 and 450 GT deliver high resolution, dynamic positioning of a wafer chuck or similar substrate in two orthogonal translation axes from a single-plane carriage. For added flexibility, a vertical Z-axis with tip/tilt function and a rotary axis for wafer offset correction can be added on the carriage beneath the wafer chuck. Other options are available for encoder and interferometer feedback, if required.

High efficiency linear motors minimize heat generation and apply drive forces through the center of the gravity of the stage resulting in superior long-term repeatability and dynamic performance. The maximum velocity reaches 1.5m/sec., with acceleration of 2G (Y axis) and 3G (X axis).  With a rated payload of 20 kg, the new 300 Hz natural frequency stage features high accuracy (encoder feedback) at 50 nm (3 sigma) and high repeatability at 10 nm (3 sigma), making it ideal for tasks that require a high performing positioning stage for 450 mm wafers.

High efficiency linear motors minimize heat generation and apply drive forces through the center of the gravity of the stage resulting in superior long-term repeatability and dynamic performance. The maximum velocity reaches 1.5m/sec., with acceleration of 2G (Y axis) and 3G (X axis).  With a rated payload of 20 kg, the new 300 Hz natural frequency stage features high accuracy (encoder feedback) at 50 nm (3 sigma) and high repeatability at 10 nm (3 sigma), making it ideal for tasks that require a high performing positioning stage for 450 mm wafers.

Business Development Manager, Walter Silvesky, notes, “The all-new DynamYX Datum 450 and 450 GT feature unique performance characteristics that are achieved in part due to the highly differentiated and proprietary construction using advanced ceramics (SiC) that yields lightweight and incredibly rigid stage structures with high natural frequencies and exceptional thermal stability. A low-profile monolithic stage architecture with integrated pressure-vacuum air bearings provides unsurpassed stepping and scanning performance.”

 

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

NEW PRODUCTS

KLA-Tencor announces new defect inspection systems
07/12/2018KLA-Tencor Corporation announced two new defect inspection products at SEMICON West this week, addressing two key challenges in tool and process monit...
3D-Micromac unveils laser-based high-volume sample preparation solution for semiconductor failure analysis
07/09/2018microPREP 2.0 provides order of magnitude time and cost savings compared to traditional sample...
Leak check semiconductor process chambers quickly and reliably
02/08/2018INFICON,a manufacturer of leak test equipment, introduced the UL3000 Fab leak detector for semiconductor manufacturing maintenance teams t...