Plasma-Therm acquires plasma processing technology from Nanoplas France

Plasma-Therm announced that it has acquired an innovative High Density Radical Flux plasma technology, which enables low-temperature Bosch polymer removal.

High Density Radical Flux — HDRF® —was developed by Nanoplas France as a superior plasma process for low-temperature removal of photoresists and organic polymer residues. These capabilities are especially important for device fabrication steps in the MEMS, LED, and advanced packaging markets.

Plasma-Therm is integrating HDRF technology into its existing suite of plasma etching, deposition, and wafer-dicing products. The Nanoplas-developed HDRF low-temperature photoresist stripping capability is also applicable to Bosch polymer removal after DRIE processing.

“We are eager to make the HDRF technology available to our existing customers and potential customers,” said Ed Ostan, vice president of marketing for Plasma-Therm. “HDRF fits very well into our etch and deposition product line, because this will allow Plasma-Therm to provide multi-step solutions to specialized device manufacturers for both R&D and production use.”

Plasma-Therm will also offer ongoing support to Nanoplas customers. The Nanoplas installed baseis primarily made up of DSB 6000 and DSB 9000 HDRF systems.

HDRF enables removal of photoresist, as well as organic polymers left on trench sidewalls following DRIE processes. These applications are sought for advanced packaging, MEMS, and power devices.

HDRF systems incorporate a multi-zone, remote, inductively coupled plasma (ICP) source, which produces up to 1,000 times greater chemical concentration than a conventional ICP source.

HDRF provides better performance than wet processing and regular plasma processing in terms of selectivity, low damage, flexibility, and high-aspect-ratio efficiency. HDRF provides superior polymer removal efficiency for high-aspect-ratio (greater than 50:1) structures.

With operating temperatures lower than 80° C., and with high selectivity to TiN, Al, Au, SiO2, and Si3N4, HDRF provides damage-free residue removal for ultra-sensitive devices.

Nanoplas introduced the semi-automatic DSB 6000 system in 2008. It was followed in 2011by the fully automatic 200mm DSB 9000 system, which accommodates one or two process modules. Both systems are capable of chemical downstream etching, stripping and cleaning applications. The company also designed the HDRF300 system for advanced cleans for 3D-IC fabrication. Nanoplas customers include global companies utilizing the systems in volume production, and also R&D and pilot line facilities, company officials said.

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

NEW PRODUCTS

KLA-Tencor announces new defect inspection systems
07/12/2018KLA-Tencor Corporation announced two new defect inspection products at SEMICON West this week, addressing two key challenges in tool and process monit...
3D-Micromac unveils laser-based high-volume sample preparation solution for semiconductor failure analysis
07/09/2018microPREP 2.0 provides order of magnitude time and cost savings compared to traditional sample...
Leak check semiconductor process chambers quickly and reliably
02/08/2018INFICON,a manufacturer of leak test equipment, introduced the UL3000 Fab leak detector for semiconductor manufacturing maintenance teams t...