Multitest ships first MEMS tri-temp solution for 3+2 axis magnetic test and calibration

Multitest, a designer and manufacturer of final test handlers, contactors and load boards used by integrated device manufacturers (IDMs) and final test subcontractors worldwide, announces that its solution for 3-axis magnetometer plus 2-axis low g-test and calibration fully supports the technical features of today’s advanced 3D hall sensors. The modular concept for sensor test equipment ensures the most economic equipment utilization.

The system has been designed for the industrial and automotive market segments. Both require the highest accuracy and precision as well as the full temperature scope of ambient-hot-cold. The test and calibration solution consists of a MEMS specific add-on that is combined with the MT9510 XP, a standard tri-temp pick-and-place test handler. It leverages the Hemholz know-how from the magnetometer test set-up for the MT93xx and expands it to the pick-and-place handling solution for the full tri-temp range from -40°C up to +150°C.

The Multitest solution ensures a superior magnetic field homogeneity and high magnetic field strength of 20 mT. It requires only one insertion for the magnetic test and calibration of all three magnetic axes and substantially drives down the cost of test this way. Additional cost savings were realized, because the MEMS cart is added to an existing standard handler already available on the test floor. For future standard IC testing, the cart can be easily undocked.

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

NEW PRODUCTS

Multitest ships first MEMS tri-temp solution for 3+2 axis magnetic test and calibration
11/25/2013Multitest, a designer and manufacturer of final test handlers, contactors and load boards used by integrated devi...
Infinite Graphics Incorporated calibration masks accommodate large size requirements
11/20/2013Infinite Graphics Incorporated, a precision graphics company, produces a wide variety of calibration masks used by m...
EV Group introduces non-contact lithography system
11/19/2013Leveraging EVG's expertise in photolithography, the EVG PHABLE system incorporates a unique contactless lithography mask-based approach that enables f...