Dynaloy scientists to highlight time- and money-saving benefits of new single wafer cleaning technology

Scientists from Dynaloy, LLC and EV Group will explain a new, one-step cleaning process for removing negative dry film and negative spin-on film photoresist on April 24, 2014 at the SEMATECH Surface Preparation and Cleaning Conference in Austin, Texas. Authors from Dynaloy include Technology Manager Kim Pollard, Chemist Travis Acra, and Chemical Engineer Richard Peters.

Known as CoatsClean technology, this approach to cleaning represents an improvement in process technology because it uses fewer chemicals, shortens process times, enables high wafer-to-wafer consistency, and offers process flexibility. All of these advantages come together in this process that has its own tool, the newly developed EVG-300RS.

During the presentation, researchers will explain in detail how the CoatsClean technology process works. First, coat the wafer with a small amount of a specially formulated cleaner, then heat the formulation on the wafer, and finish with a rinse. Local point-of-use heating offers flexibility by allowing different wafer types to be cleaned with the same tool in the same bowl, eliminating the cost and time involved in setting up transitions. This process works on several different wafer types for both 200mm and 300mm wafers.

“Unlike spray processes that require large quantities of liquid for cleaning, CoatsClean technology is less expensive because it involves comparatively small amounts of cleaning solution. This factor creates a lower cost of ownership and a decrease in cost per clean, two important considerations within the industry,” said Pollard.

This new process also saves time by dramatically reducing the risks associated with bath immersions that use the same liquid for multiple batches. By using small quantities of fresh liquid for each clean, CoatsClean technology allows for a consistent process that protects the pre-clean integrity of the wafer.

The presentation during SEMATECH will feature compelling visual evidence of how well CoatsClean technology removes photoresists and residue. During testing, researchers used a wet acid-based etch step to remove the copper field metal, a sensitive indicator for resist removal quality. They found no detectable irregularities in the optical microscopy images after copper field metal etching. Instead, they saw complete resist removal and a compatible copper surface finish.


Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Spectral reflectometer for film thickness measurement
04/08/2014Verity Instruments, Inc. is pleased to announce the availability of its new SP2100 Spectral Reflectometer designed for film thickness measurement f...
New Kimtech Pure G3 EvT nitrile gloves
04/03/2014Kimberly-Clark Professional has introduced a new glove that is designed to provide process protection for the semiconductor and electronics industries....
UVOTECH releases UV-Ozone Cleaning System
04/03/2014Using a UV-Ozone Cleaner, near atomically clean surfaces can be achieved in minutes without any damage to your devices. ...