MEMS for mobile industry will reach $6.4B by 2018


Market demand for new sensors will lead to a $6.4B market by 2018.

Necessary attributes of a MEMS engineer for new product development


In the development of new MEMS products, the team is the most important factor.

Leti Innovation Days to present preview of future developments in nanotechnologies

06/06/2013 CEA-Leti will present recent advances and a preview of future developments in micro- and nanotechnologies, followed by workshops on key technical f...

Fab equipment spending: 23% growth for 2014

06/04/2013 Fab equipment spending will grow two percent year-over-year  (US$ 32.5 billion) for 2013 and about 23 to 27 percent in 2014 ($41 billion) acco...


-SCHOTT offers wide product portfolio of glass wafers for semiconductor industry

ENP Newswire - 05 July 2013Release date- 04072013 - Mainz (Germany) & Tokyo (Japan) - The international technology company SCHOTT with its business unit ...

Melexis Introduces Next Generation Triaxis® Position Sensor with SAE J2716 SENT Protocol for Safety Critical Applications

Tessenderlo, Belgium – The SAE J2716 SENT (Single Edge Nibble Transmission) protocol serves safety critical, cost sensitive applications in the aut...

Manufacturing innovations in MEMs, LEDs, silicon photonics, and printed/flexible electronics

SAN FRANCISCO, USA: Recent advances in microelectronics technology and production processes have led to the rapid acceleration in MEMs and LED manufacturing,...

Latest Manufacturing Innovations in MEMs, LEDs, Silicon Photonics, and Printed/Flexible Electronics Featured at SEMICON West

The Semiconductor Equipment and Materials International issued the following news release:Recent advances in microelectronics technology and production proce...



Rapid Defect Indentification with Layout-Aware Diagnosis

Scan logic diagnosis is a powerful tool to help failure analysis engineers determine the root cause of a failing die. Yield engineers, on the other...

Flip Chip Devices get Flat and Happy

Thin is definitely in, but what our modern flip chip devices really want is to be flat and happy! As flip chip die have become increasingly thinner...
Sponsored by

Automated Test Creation for Mixed Signal IP using IJTAG

The creation of test patterns for mixed signal IP has been, to a large extent, a manual effort. To improve the process used to test, access, and co...


Surface Cleaning and Preparation

This introduction requires the development of new critical and selective cleans tackling galvanic corrosion, pattern collapse both in FEOL and BEOL process s...

450mm Status Report

Hear from the G450C General Manager, Paul Farrar Jr., on the current status of activities, key milestones and schedules, and imec’s senior business developme...
Sponsored by:

Innovation in Semiconductor Manufacturing Instrumentation

As the semiconductor industry moves toward smaller geometries, manufacturing processes are becoming more complex. In particular, they’re more demanding of al...
Sponsored by:




There is no current content available.


© 2013. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS