CPI presents ultra-flexible OTFT device array suitable for foldable AMOLED displays of the future

The Centre for Process Innovation (CPI) has developed novel backplane fabrication processes to allow the bending of Organic Thin Film Transistors (OTFT) arrays to small radii (1 mm) without a significant reduction in device performance. The work undertaken demonstrates progress towards optimum Organic Semiconductor (OSC)/OTFT processing and performance to enable their integration into ultra-flexible active matrix organic light emitting diode AMOLED backplanes. High performance OSC materials with charge mobility suitable for OLED driving were used in the tests on 50 micron thick PEN film. A demonstration video of the bend testing of the array can be viewed here.

In order to achieve the tight bend radius, the multiple interfaces present in the device stack were optimised to allow good adhesion under the strains experienced in the bending test.  Using patterned OSC layers and additional passivation layer processing, display pixel size OTFTs were fabricated and these were repeatedly bent (up to 10,000 times) to a radius of 1 mm, which equates to a strain of 2.5%.  Minimal change in the turn on voltage and on current were observed for the elongated cycle test.

This demonstration of bend resistance in high performance OTFT devices is part of ongoing work to integrate these materials into active matrix backplanes for AMOLED. It is expected that within 2014 the first plastic based display demonstrators will be completed using OTFT in project ROBOLED, which has received funding through the Technology Strategy Board.

CPI is the UK’s National Centre for Printable Electronics. Focused on the development, scale-up and commercialisation of printable electronics applications, CPI is equipped with an extensive range of assets specifically chosen and developed to allow clients to understand how their products and processes perform under pilot manufacturing conditions.

bending backplane

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

NEW PRODUCTS

NanoWorld AG introduces ultra-short cantilevers for high-speed atomic force microscopy
03/11/2014After a very successful beta-testing phase, six types of AFM probes for high speed scanning will be commercially a...
Electrolube launches versatile new silver conductive adhesive for display applications
03/10/2014Electrolube, the leading supplier of formulated chemical products to the global electronic, industrial and domesti...
Extremely accurate conductive measurement technology at nanoscale resolution for failure analysis
03/04/2014Park Systems, a manufacturer of Atomic Force Microscopy systems since 1997 announced PinPoint Conductiv...