New electrical energy storage material shows its power

A powerful new material developed by Northwestern University chemist William Dichtel and his research team could one day speed up the charging process of electric cars and help increase their driving range.

An electric car currently relies on a complex interplay of both batteries and supercapacitors to provide the energy it needs to go places, but that could change.

“Our material combines the best of both worlds — the ability to store large amounts of electrical energy or charge, like a battery, and the ability to charge and discharge rapidly, like a supercapacitor,” said Dichtel, a pioneer in the young research field of covalent organic frameworks (COFs).

Dichtel and his research team have combined a COF — a strong, stiff polymer with an abundance of tiny pores suitable for storing energy — with a very conductive material to create the first modified redox-active COF that closes the gap with other older porous carbon-based electrodes.

“COFs are beautiful structures with a lot of promise, but their conductivity is limited,” Dichtel said. “That’s the problem we are addressing here. By modifying them — by adding the attribute they lack — we can start to use COFs in a practical way.”

And modified COFs are commercially attractive: COFs are made of inexpensive, readily available materials, while carbon-based materials are expensive to process and mass-produce.

Dichtel, the Robert L. Letsinger Professor of Chemistry at the Weinberg College of Arts and Sciences, is presenting his team’s findings today (Aug. 24) at the American Chemical Society (ACS) National Meeting in Philadelphia. Also today, a paper by Dichtel and co-authors from Northwestern and Cornell University was published by the journal ACS Central Science.

To demonstrate the new material’s capabilities, the researchers built a coin-cell battery prototype device capable of powering a light-emitting diode for 30 seconds.

The material has outstanding stability, capable of 10,000 charge/discharge cycles, the researchers report. They also performed extensive additional experiments to understand how the COF and the conducting polymer, called poly(3,4-ethylenedioxythiophene) or PEDOT, work together to store electrical energy.

Dichtel and his team made the material on an electrode surface. Two organic molecules self-assembled and condensed into a honeycomb-like grid, one 2-D layer stacked on top of the other. Into the grid’s holes, or pores, the researchers deposited the conducting polymer.

Each pore is only 2.3 nanometers wide, but the COF is full of these useful pores, creating a lot of surface area in a very small space. A small amount of the fluffy COF powder, just enough to fill a shot glass and weighing the same as a dollar bill, has the surface area of an Olympic swimming pool.

The modified COF showed a dramatic improvement in its ability to both store energy and to rapidly charge and discharge the device. The material can store roughly 10 times more electrical energy than the unmodified COF, and it can get the electrical charge in and out of the device 10 to 15 times faster.

“It was pretty amazing to see this performance gain,” Dichtel said. “This research will guide us as we investigate other modified COFs and work to find the best materials for creating new electrical energy storage devices.”

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

One thought on “New electrical energy storage material shows its power

  1. Salim Mehmud

    The future of Renewable Energy lies in our ability to successfully solve the inherent issues of currently in use storage devices. And the hectic pace at which the research and development work is advancing, the day is not far when an efficient, enduring, high capacity and affordable battery would be available not only to power the traction machines but also store the renewable energy for use when needed.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

LIVE NEWS FEED

NEW PRODUCTS

Novel Wafer Analyzer for up to 300mm wafer using high speed Raman Imaging Technology
08/08/2016Nanophoton introduces RAMANdrive - a new Wafer Analyzer - for a wide range of applications at semiconductor market a...
Pfeiffer Vacuum introduces HiPace 2800 turbopump for ion implantation applications
07/06/2016Pfeiffer Vacuum has introduced the HiPace 2800 IT turbopump that is designed for ion implantation applications....
NanoFocus AG introduces new inspection system for semiconductors industry
05/31/2016NanoFocus AG, the developer and manufacturer of optical 3D surface measuring technology, introduces the new measuring system µ...